Introduction
A conductivity meter electrode is an important component of a conductivity meter. It is a probe that is placed into the solution to be measured and through which current is passed to measure the conductivity. There are many different types of electrodes, each with different characteristics and applications. The two most common types are the two-electrodes system, which is used for measuring the electrical conductivity of a solution, and the three-electrodes system, which is used to measure the potential difference between two points in the solution. Conductivity meter electrodes are essential for accurate and reliable measurements of conductivity and therefore have wide applications in the food, beverage, and chemical industries.
Features:
| The conductivity industrial series of electrodes are specially used for the measurement of conductivity value of pure water, ultra-pure water, water treatment, etc.It is especially suitable for conductivity measurement in the thermal power plant and the water treatment industry. |
| It is featured by the double-cylinder structure and the titanium alloy material, which can be naturally oxidized to form the chemical passivation. |
| Its anti-infiltration conductive surface is resistant to all kinds of liquid except fluoride acid. The temperature compensation are: NTC2.252K, 2K, 10K, 20K, 30K, ptl00, ptl000, etc. which are specified by the user. |
| K=10.0 or K=30 electrode adopts a large area of platinum structure, which is resistant to strong acid and alkaline and has strong anti-pollution capacity; |
| It is mainly used for on-line measurement of the conductivity value in the special industries, such as the sewage treatment industry and the seawater purification industry. |
Technical Indexes:
| Constant of electrode | Compressive strength | Measuring range | Connection | Material | Application |
| 0.01 | 0.6MPa | 0-20uS/cm | Pipes, hoses and flanged pipes, etc. Diameter: Φ6, Φ8, Φ14, etc. | 316L Titanium Alloy | Power Plant Water Treatment Industry |
| 0.1 | 0.6MPa | 0-200uS/cm | Pipes, hoses and flanged pipes, etc. Diameter: Φ6, Φ8, Φ14, etc. | 316L Titanium Alloy | Power Plant Water Treatment Industry |
| 1.0 | 0.6MPa | 0-2000uS/cm | 1/or 3/4 Thread Installation | 316L Titanium Alloy and Platinum | Water Treatment Industry |
| 10.0 | 0.6MPa | 0-20000uS/cm | 1/2or 3/4 Thread Installation | Polysulfone and Platinum | Water Treatment Industry |
| 30.0 | 0.6Mpa | 30-600mS/cm | 3/4 Thread Installation | Polysulfone | acid cleaning |
